Scrap Processing Machines For Ferrous/Non-Ferrous – Largest Manufacturer and Exporters in India

Home » Triple Compression Jumbo Top Ejection

Category Archives: Triple Compression Jumbo Top Ejection

Triple Compression Jumbo Top Ejection

Triple compression balers are used for reducing three dimensions of the scrap material by using hydraulic force from three different angles. The two horizontal cylinders are arranged at right angles to each other. Vertical reduction generally takes place by hydraulic pressure on the lid cylinder. One of the horizontal cylinders presses the scrap against the ejection door of the baler. This door is raised hydraulically after baling is complete. The bundle is then removed from the chamber by horizontal cylinder. Please check it out and for more details please visit us at : http://www.advancehydrautech.com/

Technical Specifications :

BALING CHAMBER 30″ x 38″ x 74″ (H x W x L)
BALE SIZE 15″ x 15″ x 8-10″ (H x W x L)
ELECTRIC MOTOR 40 H.P. 3 PHASE 1440 RPM
BODY FABRICATED
OIL DRIVE GEAR CUM AXIAL PISTON PUMP
WORKING LIQUID HYDRO/ENCLO – 68
FORCE ON LID CYCLINDER 74 TONS
FORCE ON MAIN CYLINDER 100 TONS
FORCE ON SIDE CYCLINDER 150 TONS
FORCE ON EJECTOR CYCLINDER 18 TONS
WORKING PRESSURE 3300 PSI
HARD LINER PLATES PROVIDED
SHEARING BLADES PROVIDED
ELECTRICAL PANEL PROVIDED
WEIGHT OF  THE BALE 60 – 120 KGS (IN MS) & 25-40 KGS (IN ALUMINIUM).
IDLE CYCLE TIME 90 – 100 SECONDS (APPROX)
WEIGHT OF THE MACHINE 11.5 TONS (APPROX)
OIL TANK CAPACITY 1200 LTS. (APPROX)
EJECTION OF BALE BY BOTTOM CYLINDER TOP EJECTION
OPERATION OF MACHINE MANUAL THROUGH LEVERS
OVERALL DIMENSIONS 7′ X 9′ X 20′ (H X W X L) (APPROX)
Advertisements
%d bloggers like this: